Service manual
7020
for details.
Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded
for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html|
URL http://www.adobe.com/products/acrobat/readstep2.html]]
*[[Trademark ownership information| FILE V:\TEXT\TRADEMRK.TXT NEW]]
Blank copies and a shading of toner covering the drum.DESCRIPTION: SOLUTION ID:
205268
SOLUTION:
CAUSE: Failed PRCB.
SOLUTION: Replace the PRCB (p/n 26NA-9022).
USAGE:
0
F26-1 and the paper size detection in the trays will not show the correct size.DESCRIPTION: SOLUTION ID:
205434
SOLUTION:
CAUSE: Incorrect setting for the country destination.
SOLUTION: Set the destination from Japan to USA, replace developer, and reset the values. The
error should not reappear and the trays will indicate the correct paper size.
SPECIAL NOTE: Solution provided by Brandon Griesinger, PERRY CORPORATION
USAGE:
0
"Please remove paper from exit of machine" message after swapping the control board.DESCRIPTION: SOLUTION ID:
205854
SOLUTION:
CAUSE: The PRMB from the original board was not swapped to the new board.
SOLUTION: Swap out the PRMB between the two boards.
USAGE:
0
FK101, E89-94 code, and machine is flashing ON and OFF.DESCRIPTION: SOLUTION ID:
206602
SOLUTION:
CAUSE: Communication error, file access error.
SOLUTION: Remove the FK and disconnect battery CN403 for 10 minutes and reconnect and
re-install the FK. If this does not resolve the problem, replace the main fax board (p/n 13FQ9010).
USAGE:
0
FK102, E89-94 code, and machine is flashing ON and OFF.DESCRIPTION: SOLUTION ID:
206608
SOLUTION:
CAUSE: Communication error, file access error.
SOLUTION: Remove the FK and disconnect battery CN403 for 10 minutes and reconnect and
re-install the FK. If this does not resolve the problem, replace the main fax board (p/n 13FQ9010).
USAGE:
0
137
Copyright 2005, Konica Minolta Business Solutions U.S.A., Inc.
May 2005