Service manual

7020
DB210, the gears do not align after installing the parts from DB209/210/409/410 Technical
Bulletin #1, Gear Skipping - J16 Jams.
DESCRIPTION: SOLUTION ID:
168692
SOLUTION:
CAUSE: The parts are for the DB410 only.
SOLUTION: The parts can only be used with a DB410.
Notes:
1. See [[DB410 Technical Bulletin #1| URL
http://techweb.konicabt.com/tpm/media/db410tb01.pdf]]) for details.
2. To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for
free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL
http://www.adobe.com/products/acrobat/readstep2.html]]
*[[Trademark ownership information| FILE V:\TEXT\TRADEMRK.TXT NEW]]
USAGE:
0
DB409, the gears do not align after installing the parts from DB209/210/409/410 Technical
Bulletin #1, Gear Skipping - J16 Jams.
DESCRIPTION: SOLUTION ID:
168693
SOLUTION:
CAUSE: The parts are for the DB410 only.
SOLUTION: The parts can only be used with a DB410.
Notes:
1. See [[DB410 Technical Bulletin #1| URL
http://techweb.konicabt.com/tpm/media/db410tb01.pdf]]) for details.
2. To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for
free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL
http://www.adobe.com/products/acrobat/readstep2.html]]
*[[Trademark ownership information| FILE V:\TEXT\TRADEMRK.TXT NEW]]
USAGE:
0
Does the 7020 support Bates stamping?DESCRIPTION: SOLUTION ID:
168704
SOLUTION:
The 7020 does not support Bates stamping.
USAGE:
0
FK102, When Communications Journal is set to Daily, can the print time (9:00am) be
changed?
DESCRIPTION: SOLUTION ID:
168819
SOLUTION:
This is a set time and can not be changed.
USAGE:
0
FK101, When Communications Journal is set to Daily, can the print time (9:00am) be
changed?
DESCRIPTION: SOLUTION ID:
168823
SOLUTION:
This is a set time and can not be changed.
USAGE:
0
How to disable copier printing (JOB STOP) for an out of toner condition.DESCRIPTION: SOLUTION ID:
169262
SOLUTION:
The following dip switches set in the 25 mode will limit and disable the copier from printing when
the message of PLEASE ADD TONER is displayed on the operation control panel.
DIPSW SETTINGS DESCRIPTION
4-2 4-3 4-5
0 0 1 after 100 copies.
1 0 1 after 400 copies.
0 1 1 after 700 copies.
1 1 1 after 1000 copies
Note: These dip switches will only be effective when dip switch 4-5 is set to a 1.
USAGE:
0
How to program the number of copies for when an out of toner condition (Toner low
condition) is displayed on the operation control panel.
DESCRIPTION: SOLUTION ID:
169269
SOLUTION:
The following dip switches set in the 25 mode will correspond to the number of copies made after
the TLD (toner level detection) detects that the machine needs toner and the message displayed to
PLEASE ADD TONER.
DIPSW SETTINGS DESCRIPTION
4-0 4-1
0 0 after 0 copies.
1 0 after 100 copies.
0 1 after 200 copies.
1 1 after 500 copies
USAGE:
0
132
Copyright 2005, Konica Minolta Business Solutions U.S.A., Inc.
May 2005