Service manual

7020
F34-1 error message.DESCRIPTION: SOLUTION ID:
156304
SOLUTION:
CAUSE: Failed system control board.
SOLUTION: Replace the System Control Board (p/n 26NA-9303).
SPECIAL NOTE: Solution provided by Jason Paluchniak, ALBIN BUSINESS CENTERS
USAGE:
0
Equitrac* products such as PrintLog* Professional are unable to correctly track both print
and copy volume.
DESCRIPTION: SOLUTION ID:
156474
SOLUTION:
CAUSE: Konica copiers/printers have software dipswitches that must be set properly to enable
correct volume count.
SOLUTION: The [[Network Transaction Station Connection PDF| URL
http://techweb.konicabt.com/tpm/media/Net_Trans_Station.pdf]] lists the connector pinout and the
dipswitch settings for 7020 and 7075 series.
Notes:
1. See also the [[Network Transaction Station Connection Revision A PDF| URL
http://techweb.konicabt.com/tpm/media/Net_Trans_Station_rev A.pdf]].
2. To view the PDFs, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for
free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL
http://www.adobe.com/products/acrobat/readstep2.html]]
*[[Trademark ownership information| FILE V:\TEXT\TRADEMRK.TXT NEW]]
USAGE:
0
When setting mixed original mode to default ON at power up, PLEASE CLOSE RADF UNIT
message is displayed when the RADF is raised for scanning or platen copying.
DESCRIPTION: SOLUTION ID:
157009
SOLUTION:
CAUSE: Software dipswitch 11-0 is OFF.
SOLUTION: Set Software dipswitch 11-0 ON. To set software dipswitch 11-0, perform the
following:
1. Access the 25 mode (power the copier ON, while pressing the 2 and 5 keys).
2. Select SOFTWARE SW.
3. Using the up/down arrows, scroll to software switch 11-0.
4. Select ON.
5. Power the copier OFF/ON to return to normal copy mode.
USAGE:
0
FK101, is an audible notification (ring) available when the FK101 is being called with an
incoming fax?
DESCRIPTION: SOLUTION ID:
157034
SOLUTION:
The FK101 does not have the capability to ring when it is being called. If this feature is needed, a
telephone can be connected to the TEL jack of the FK101. Whenever the FK101 is called, the
telephone will ring, providing notification that there is an incoming fax.
USAGE:
0
Dust proof cover for Lower Paper Feed Unit now available.DESCRIPTION: SOLUTION ID:
157294
SOLUTION:
To shield the torque limiters of the double feed prevention rollers located in the lower paper feed
unit from dust that drops from above, a dust proof cover (mylar sheet) is now affixed to the lower
paper feed (PF) unit frame, directly above the double feed (DF) prevention mechanism. See
[[7020/7022/7025/7030/7035/7130/7135 Technical Bulletin #14| URL
http://techweb.konicabt.com/tpm/media/7020tb14.pdf]] for details.
Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded
for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html|
URL http://www.adobe.com/products/acrobat/readstep2.html]]
*[[Trademark ownership information| FILE V:\TEXT\TRADEMRK.TXT NEW]]
USAGE:
0
FK101, how to have received faxes held in memory and printed later as necessary.DESCRIPTION: SOLUTION ID:
157443
SOLUTION:
To hold received faxes in memory, use Compulsory Memory Reception. To set up Compulsory
Memory Reception, perform the following:
1. Select copy mode and press the help key.
2. Select Key-Ope Mode.
3. Enter 4 digit key operator password (if necessary).
4. Select Fax.
5. Select Function Set.
6. Select Compulsory mem. Rx.
7. Select On.
8. Enter a numeric password up to 4 digits in length.
USAGE:
0
126
Copyright 2005, Konica Minolta Business Solutions U.S.A., Inc.
May 2005