Service manual

7020
DF314, code J63-02 with paper jamming at the exit of DF314.DESCRIPTION: SOLUTION ID:
146368
SOLUTION:
CAUSE: The paper exit detecting spring has weakened and does not allow exit actuator/2 to
properly flag PS303 (original exit photosensor).
SOLUTION: Replace the paper exit detecting spring (p/n 13GL46680) as needed.
SPECIAL NOTE: Solution provided by Bill England, Albin Business Centers.
USAGE:
0
What is the part number for the ADU door lock shaft?DESCRIPTION: SOLUTION ID:
146616
SOLUTION:
The part number for the ADU door lock shaft is 26NA50100.
USAGE:
0
IP422 NIC, how to FTP Print via the internal NIC.DESCRIPTION: SOLUTION ID:
146832
SOLUTION:
To FTP Print via the internal NIC in the IP422, perform the following:
1. From a workstation on the network select the DOS command prompt screen and go to the DOS
prompt.
2. Type 'FTP' and then press 'Enter'.
3. Type 'open<one space><TCP/IP* address of the NIC where the file is to be sent>' and then
press 'Enter'. The display will show:
User (IP address of the device): (none)):
4. Type 'PORT1' and then press 'Enter'. The display will show:
230 User name Okay, logged in.
5. Type 'lcd' and then press 'Enter'. The display will show:
Local directory now C:\.
6. Type 'put<one space><file name and extension of the file you want to print>' and then press
'Enter'.
7. The file will print immediately. The display will show:
200 Port command OK."
150 About to open connection.
226 file transferred.
Notes:
1. The internal NIC must be at least version 6.30a
2. Only FTP via a DOS command prompt works.
3. The file must be located on the workstation's drive and must be one of the following types: txt,
prn, pcl or ps. Only these file types are printer ready files and will print correctly.
*[[Trademark ownership information| FILE V:\TEXT\TRADEMRK.TXT NEW]]
USAGE:
0
Unable to remove one inch deletion on the lead edge of copy.DESCRIPTION: SOLUTION ID:
150048
SOLUTION:
CAUSE: There is a difference in height of the v-mirror from the front to the rear.
SOLUTION: To correct the height of the v-mirror, perform the following:
1. Remove the platen glass.
2. Pull the v-mirror to the right until the v-mirror is clearly visible.
3. Reinstall the platen glass (with the glass edge) over the v-mirror frame.
4. Measure the distance of the v-mirror to the glass on the front side and then the rear side.
5. If there is a difference, reform either the front or rear bracket that appears to be deformed.
USAGE:
0
DB210, intermittent J82.DESCRIPTION: SOLUTION ID:
150139
SOLUTION:
CAUSE: The actuator for jam detect 2 photosensor (PS105) is out of position and sticking on the
clear plastic paper guide numbered 7.
SOLUTION: Reposition the actuator on PS105 to prevent it from contacting the paper guide.
USAGE:
0
DB410, intermittent J82.DESCRIPTION: SOLUTION ID:
150140
SOLUTION:
CAUSE: The actuator for jam detect 2 photosensor (PS105) is out of position and sticking on the
clear plastic paper guide numbered 7.
SOLUTION: Reposition the actuator on PS105 to prevent it from contacting the paper guide.
USAGE:
0
What print drivers are compatible with Macintosh* OS X (Version 10.2.x)?DESCRIPTION: SOLUTION ID:
150592
SOLUTION:
The drivers can be downloaded from [[Konica's website| URL
http://www.konicabt.com/Support/Drivers/index.html]].
Macintosh OS 9x applications within OS 10.2.x are supported using the current [[Adobe*
PostScript* drivers for Macintosh| URL
USAGE:
0
123
Copyright 2005, Konica Minolta Business Solutions U.S.A., Inc.
May 2005