Installation manual

2/3
2
2.1
0
open or closed tags (minimum cross-section 0.2mm
2
, maximum 1.5 mm
2
) I/O connection on HE 10 type connector: with preformed
cables with flying leads (cross-section 0.324 mm
2
), ribbon
cables (cross-section 0.08 mm
2
) or conection cables (cross-
section 0.324 mm
2
).
16 inputs/12 outputs 32 inputs/32 outputs
Inputs c 24 V
Relay outputs 3 A (lth)
Inputs a 100…120 V
Relay outputs 3 A (lth)
Inputs c 24 V
Outputs c 24 V/0.5 A
Inputs c 24 V
Outputs c 24 V/0.1 A
Connection via 20-way HE 10 connector
8, 12 or 16 channels, with or without LED, with common or
terminals per channel
Inputs: 16 channels c 5V TTL, c 24 V, c 48 V, a 48 V,
a 115 V or 230 V, 2 terminals per channel
Outputs: 8 or 16 channels, with 1 N/O, 1 or 2 C/O or solid state
relays, c 5…48 V, c 24 V, a 24…240 V 1 or 2 terminals
per channel
Yes (see page 2/44)
Yes (see page 2/46)
Sensor voltage monitoring
Type 1 Type 2 Type 1
Positive/Negative – Positive
c 2-wire,
c 3-wire PNP/NPN
c/a 2-wire, a 2-wire c 2-wire,
c 3-wire PNP
Preactuator voltage monitoring
Configurable fallback of outputs
Yes
Protected
Positive
TSX DMZ 28DR TSX DMZ 28AR TSX DMZ 28DT TSX DMZ 28DTK TSX DMZ 64DTK