User`s guide

INDEX

Filter | Infrared clean

When an infrared channel is available, use this option to remove dust spots and

scratches. It only causes image softening in the immediate vicinity of the spots and

scratches, except when this option is set to "Heavy".

You can control the amount of cleaning of the image by choosing the Light, Medium or

Heavy options.

Basic Option: This option is displayed when the scanner has an infrared lamp.

Filter | Restore colors

This option is used to restore the red, green, and blue colors by making them more

independent. This works best when scanning at high resolution.

If you select this option, the film type in the Color tab isn't used.

Basic Option: This option is always displayed.

Filter | Restore fading

This option is used to restore the effects of faded film dyes. Slide film often shifts

towards red over time, and color negative film towards cyan.

If you select this option, the film type in the Color tab isn't used.

Basic Option: This option is always displayed.

Filter | Grain reduction

Use this option to reduce the graininess of a scan. It can also reduce the effect of

electronic noise.

You can control the amount of softening of the image by choosing the Light, Medium or

Heavy options.

Advanced Option: This option is always displayed.

Filter | Sharpen

This option enables an unsharp mask. This is used to sharpen images, the unsharp

mask will improve images for printing.

If you're planning on editing images after scanning them, then you should leave this

option off.

Basic Option: This option is always displayed.