User`s guide

INDEX
66
Crop | X/Y images
Set these options to set up a grid for scanning separate images. Each image within
the grid can be cropped and rotated independently.
Advanced Option: This option is displayed whenCrop | Multi crop (p. 65) is set to
"Custom".
Crop | X/Y spacing
These values can be set when Crop | X/Y images (p. 66) is set to a value greater than
1. See Crop | X/Y images (p. 66).
Set the approximate width (X spacing) and height (Y spacing) of each element in the
grid defined by Crop | X/Y images (p. 66). For example, 8 4x6 photos on a 12x16
flatbed scanner would have X spacing of 6 inches and Y spacing of 4 inches.
Advanced Option: This option is displayed whenCrop | Multi crop (p. 65) is set to
"Custom".
Crop | X/Y padding
If these values are set to 0, then the grid is centered, otherwise this is an offset to the
first box in the grid.
Advanced Option: This option is displayed whenCrop | Multi crop (p. 65) is set to
"Custom".
Crop | X/Y linked
This option indicates that all frames in the horizontal or vertical direction move together
when one of the frames is offset. This usually indicates strip film in a horizontal or
vertical orientation.
Advanced Option: This option is displayed whenCrop | Multi crop (p. 65) is set to
"Custom".
Crop | Show multi outline
Turn this option off if you don't want to see the lines around the multi-crop boxes.
Advanced Option: This option is displayed whenCrop | Multi crop (p. 65) is used.
Crop | Auto rotate
Setting this option will automatically rotate the crop box. It will find the best placement
for it to capture as much of the image as possible.
This option only functions when the crop box fits inside the preview area both
horizonally and vertically. Some slide scanners let you put the slide in landscape or
portrait mode, and this option rotates the image to either portrait or landscape