Scalewatcher® Nano Hard Water Treatment system Owner’s Manual English
English Subject Page Contents of box.
English Congratulations for purchasing an environmentally friendly electronic water conditioner, and thank you for choosing the Scalewatcher Nano system to treat your home. Please read this short manual in its entirety for a quick and successful installation.
English Installing the coil Unroll the cable and secure the middle of the cable to the pipe with a cable tie. Do not cut the cable in half! (Image 1). Make 18 windings with one half of the cable, starting at the vertical arrow of image 2. The horizontal arrow gives the winding direction. Secure the last winding with a cable tie.
English Mounting the control box Use the two screws and if necessary the wall anchors to mount the control box to the wall. A screwdriver and a drill are needed. You can mount the unit horizontal or vertical. Putting the Scalewatcher Nano into operation Insert the 12VDC plug of the adaptor into the power jack at the bottom of the Scalewatcher Nano and connect the adaptor to either 110V or 220 V AC. After about seven seconds the unit starts working. The Red light and the Green light should show.
English IMPORTANT NOTES Clean aerator screens: During the descaling period, some deposits may collect inside the nozzles or aerator screens. Make sure to inspect those places regularly during the initial three months until no more loose scale appears: unscrew, shake loose scale, reinstall. Drain your water heater: It is recommended to drain the water heater for best results. Drain about 5 gallons (22 liters) of water from the water heater.
English What does the Scalewatcher Nano System do that a water softener does not? ● It removes scale buildup in hot water heaters, saving energy costs. ● Saves money by not requiring the purchase or use of salt. ● Provides salt-free water, a concern for many health-conscious people. ● Provides environmentally clean water while eliminating the discharge of salt-laden water into the water table as a result of the periodic regeneration cycle of conventional water softeners.
English TYPICAL USER EXPERIENCES Soft Water Feeling The treated water is immediately altered and will start dissolving scale buildup in the pipes. The hard scale dissolves one particle at a time, so there are no problems with clogging filters or screens in the plumbing system. If you have never used a water softener before, you will experience a dramatic difference in the "feel" of the water. The water will have a softer feeling and you will notice that your hair is "squeaky clean" after a shampoo.
English After the First 90 Days. All descaling should be complete and you will be left with: ● ● ● ● Soft-feeling water from every tap. Clean pipes, faucets and showerheads. Cleaner dishes, sinks, tubs and shower stalls. Savings in energy and detergent expenses. Check the Scalewatcher Nano control panel periodically: It is recommended that you verify that the green LED light on the control panel is on. You should verify this at least twice a year.
Manufacturer's guarantee English The manufacturer's guarantee operates for two years following the date of purchase. In the unlikely event of Scalewatcher Nano becoming unserviceable, i.e. the green light fails to illuminate, send the unit back for replacement, quoting date of purchase and serial number.
