User manual

27
39
21
22
17
27
21
124,5mm (1:14)
112,5mm (1:14,5-1:16)
37/38
41
28
24
23
A8
31
A7
35
27
A6 21
Drive-axle and countershaft:
countershaft
1x item nr.: 71000403
drive
1x item nr.: 71000402
axle with standard transmission 2,67:1
Differential with countershaft with increased transmission 5,67:1
For models with multiple driven axles you
will need another drive to mount an
additional axle.
Rim versions:
Original Tamiya rims for models in scale 1:14
R
ScaleDRIVE and ScaleART rims for models in scales: 1:14 - 1:16
R
10 hole rims in scale 1:14 (Tamiya )
ScaleDRIVE aluminium rims
1 pair item nr.: 74000058
ScaleDRIVE plastic rims
1 pair item nr.: 74000404
ScaleDRIVE aluminium rims wide
1 pair item nr.: 74000059
ScaleDRIVE plastic rims wide
1 pair item nr.: 74000405
Original rear-axle rims from the Tamiya construction-kit. You may want
to use the inner rims from the Tamiya twin rear wheels as rims for the
driven front-axle.
R
R
4x
A1/2
13
19
4x
40
A3
2x
21
27
A4
A5
21
27
1x
31
35
10 hole rims in scales: 1:14,5 - 1:16
ScaleART aluminium rims
2x item nr.: 74000052
ScaleART aluminium rims wide
2x item nr.: 74000053
23
M2x6
thread-lock
thread-lock
thread-lock
thread-lock
M2
M2x20
d3,2
M2x6
M2
M3x16
M3
self-locking
M2x6
M2
d2x10
M3x6
front
countershaft with drive
1x item nr.: 71000403
front
front
front
The steering lever A5 shall be mounted to
the left side of the axle. For models with 4
axles it serves as a connector between the
first and second axle.
Attention!
Do not use grease for assembling
the drive shaft to avoid soiling
and thereby wear of the shaft!
For models in scale 1:14 (Tamiya ) use
the connection piece A1 . For smaller
models in scales 1:14,5 - 1:16 use the
shorter version A2.
R
For axles in scales: 1:14,5 - 1:16
you have to break the edge with
a sharp knife to 45° to get the full
steering radius.
M2x6
- 2 -
It is also possible to fit the axle with an
increased transmission. This requires an
additional countershaft to be mounted to
the axle. We put together the countershaft
set so you have the option to assemble the
axle with or without 2nd drive. An ad-
ditional drive set will not be required.