User manual

M3x20
M3
M2
M2x12
M3x20
Assembling to a ScaleDRIVE differential
Assembling to a ScaleDRIVE chassis
M3x20
M3
19
09
thread-lock
Assembling to a Tamiya differential
R
Assembling to a Wedico profi chassis
R
Assembling to a Tamiya chassis
R
19
09
thread-lock
20
12
09
19
thread-lock
First mount the side support plates with three
screws on the frame. Then drill the lower 4 holes
with a 2 mm drill and insert the remaining screws.
M2x6
M2
M3x6
M3
M2x6
M2
For the Tamiya chassis the crossmember is not
mounted in the area of the pendulary spring
suspension.
R
When mounting the axles be aware
of the direction of rotation.
Otherwise the wheels will turn in
different directions!!
For vehicles with street level
and 5.5mm increased height
the three angular steerings are
mounted in this orientation:
Make sure when mounting
the side panels on the frame
that the stop surface is
parallel to the frame!
For vehicles with 11mm
increased height the
three angular steerings are
mounted in this orientation:
M3
M3x6
20
02
04
17
Mount the construction
parts on the inner holes!
thread-lock
05
10
16
19
A2
20
02
04
17
thread-lock
19
09
thread-lock
20