User manual
www. SCALEDRIVE .de
ScaleART OHG - Schillerstraße 3-7 - D 67165 Waldsee
Tel.: +49 (0) 6236-416651 - Mail: info@scaleart.de
M3x12
M3
M2
M2x12
95 / 100
7 5 - 6 4
60 / 62
Item nr.: 71000311 - pendulary spring suspension
Compatible with all common commercial vehicle construction-kits
in scales 1:13 - 1:16
- suitable for ScaleDRIVE, Tamiya und Wedico chassis
- fibre-glass reinforced plastic spring brackets
- all screws are made of stainless steel
- the leave springs are made of titanium bronze
- suitable for normal chassis heights and for raised off-road vehicles
- there are multiple options for mounting the springs
R
R
T ami y a is a trademark from DICKIE- T AMI Y A Modellbau GmbH & C o. KG
W edico is a trademark from WEDICO T ruck & Construction Models GmbH
Notice for assembling!
The pendulary spring suspension can be mounted in two different types of
scales.
Scale 1:14 for models in Tamiya scale 1:14:
According to this type of scale the chasis has a width of 62mm and a center
distance of the rear-axles of about 100mm.
Scale 1:16 for models in ScaleART and Wedico scale 1:14,5 - 1:16:
Those scales have a chassis width of 60mm and a center distance of the
rear-axles of about 95mm.
In the sequence of the instructions the individual mounting steps are
highlighted as " 1:14 " and " 1:16 " so you will immediately see which instruc-
tions you will need for your model.
Additionally the pendulary spring suspension can be mounted in different
heights.
The upper drill of the spring support suits for normal chassis-heights for
road vehicles and is almost identically with the chassis-height of the Tamiya
and the Wedico construction-kits.
The hole in the middle is equivalent to a chassis-height increase of 5.5 mm
and for the the bottom hole its 11mm increased height.
R
R
R
1:14
2x
10
22
01
19
08
1:16
2x
10
22
01
08
thread-lock
M3x16
d3,2
d2
set of parts for pendulary spring 2 15000210
set of leaf springs 2 15000072
three angular steering lever 2 15000205
left bottom axle bracket 2 15000219
right bottom axle bracket 2 15000220
set of sliding plates 1 15000224
TAM bracket for steering lever 2 15000222
bushing for spring support 6 15000029
ball rod end M3 8 32900414
ball rod end M2 2 32900405
screw M2x6 18
32000012
screw M2x12 8 32000015
screwM2x14 10
32000016
screw M3x6 3 32000052
screw M3x12 5 32000055
screw M3x14 5 32000056
screw M3x16 5 32000057
screw M3x20 5 32000059
Allen screw M3x20 10
32000595
worm screw M3x16 8 32000247
nut M2 35
32000002
nut M3 20 32000004
self-locking nut M3 12 32000913
washer d2 3 32000180
washer d3,2 10 32000222
A
B
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
R
The following tools are required for assembly:
Phillips screwdriver Art.Nr.: 96000007
socket wrench 4,0mm Art.Nr.: 96000016
socket wrench 5,5mm Art.Nr.: 96000018
Allen key 1,5mm :Art.Nr.: 96000009
Allen key 2mm Art.Nr.: 96000010
nose plier Art.Nr.: 96000051
diagonal cutter Art.Nr.: 96000052
scalpell Art.Nr.: 96000036
tread locking fluid medium str. Art.Nr.: 60000504
small file
This model is not a toy. Furthermore is it not qualified for the use of children under the age of 14.
Technical changes and modifications are reserved. We do not take any responsibility for misprints
or misunderstanding of the construction detail. Reproducing and multiplying our construction-
plans without our permission will be prosecuted
street level
5,5mm increase height
11mm increased height
2x
1:14
A1
06
23
13
thread-lock
1:16
2x
13
A1
06
thread-lock
A1
A3
A2
A4
B
04
1:14
4x
07
20
18
07
1:16
4x
07
18
07