Owner's Manual
15
BASIC PROGRAMMING NOTES (continued)
CV165 Brake Squeal (Sound CV11)
CV165=0 Composite Brake Shoe
CV165=1 Cast Iron Brake Shoe
CV166 Air Dryer (Sound CV12)
CV166=0 Air Dryer 1 Default
CV166=1 Air Dryer 2
CV166=2 Air Dryer 3
CV166= 3 E4C6T Air Dryer 1
Auto Bell:
Many Second and Third Generation locomotives have been tted with an
Automatic Bell that is triggered when the horn is blown. In MANY cases
this cannot even be bypassed on modern locos. Before the FRA mandated
this feature on new locomotives the bell was of course turned on and off
separately. Some locomotives were delivered with a manual bell and have
been converted to an automatic bell. This creates a challenge in sound le
creation.
We realize that not every loco with a particular prime mover had this feature.
As such we have built in an option to turn the feature on and off. We will set
the default in the le to be what is most appropriate for the particular le.
To turn the Auto Bell OFF - Auto Bell OFF:
1. Remove the Auto bell sound slot from the function mapping chart
CV31 = 16, CV32 = 8, CV311 = 4
2. Change the sound conguration of the Auto bell sound slot
CV31 = 16, CV32 = 1,CV287 = 0
To turn the feature ON - Auto Bell ON:
1. ADD the Auto bell sound slot from the function mapping chart
CV31 = 16, CV32 = 8, CV311 = 12
2. Change the sound conguration of the Auto bell sound slot
CV31 = 16, CV32 = 1, CV287 = 1
Auto Bell Timer:
The Bell timer is amount of time the bell will play after the horn if the auto
timer is active. The timer is broken down into 1/4 of a second increments.
CV169=4 - 1 Second CV169=16 - 4 Seconds
CV169=8 - 2 Seconds CV169=20 - 5 Seconds - Default
CV169=12 - 3 Seconds