Installation & Assembly

4 5

Step 6

Open up the table frame assembly. Tighten lever on both sides of frame.

Lock the brake of center hinge. Lock the brake of casters.

1-1 Pull out plunger-lock.

1-2 Rotate allowing plunger-lock

to engage.

*** Use caution - Spring assembly

is very strong.

*** Make sure to push weight

down and keep the top ﬂat.

1-2

1-1

Step 4

Fold the frame assembly. And install shoulder bolts to connect legs with cross

bars.

Legs should be connected with cross bars from the opposite side.

Step 5

Flip the assembly over to make it stand.

Start here if NOMAD frame is preassembled.