INSTRUCTIONS` NOMAD Conference Models: 12Ft/10Ft/Sport
If you receive NOMAD frame preassembled, please go directly to Step 6 to finish installation. ASSEMBLY INSTRUCTIONS Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble this product. Step 1 Place frame structure & make sure taps are facing down. 1/2” SOCKET WRENCH & SCREW DRIVER & LEVEL CONNECTOR SCREW 30x + or + Step 2 LEG FRAME STRUCTURE Connect leg assemblies to struts as shown.
Step 4 Fold the frame assembly. And install shoulder bolts to connect legs with cross bars. Start here if NOMAD frame is preassembled. Step 6 Open up the table frame assembly. Tighten lever on both sides of frame. Lock the brake of center hinge. Lock the brake of casters. *** Use caution - Spring assembly is very strong. *** Make sure to push weight down and keep the top flat. Legs should be connected with cross bars from the opposite side. Step 5 Flip the assembly over to make it stand.
Step 7 Place a table top and install screws. Align steel tabs with threaded inserts on the bottom of table top. All done. Great job. Enjoy! Step 8 Congrats! You are done with the assembly of NOMAD. Make sure to unlock caster brakes only on one side when folding and unfolding. NOMAD Conference 12Ft/10Ft/Sport For more information about other products and accessories www.scale1to1.
SPECIAL WARNINGS: - DO NOT CRAWL, STAND, OR SIT ON THE TABLE TOP. - AVOID PLACING EXTREMELY HOT & COLD ITEMS ON THE TABLE TOP. WARRANTY: Table: This warranty is a limited warranty, and applies to the original purchase only. This collection carries a 1 year limited warranty and is valid from original date of purchase to the original owner (proof of purchase required; refer to your retailer). NOTE: Breakage of any kind voids the warranty automatically.
