User manual

6. Do not eat or smoke and do not move during the
measurement. Do not drink coffee or alcohol half an
hour before a measurement.
7. Relax 5 or 10 minutes before the measurement.
8. Wait 3 to 5 minutes before making the next
measurement.
9. Always make the measurement at room
temperature. Do not use the product near a
microwave oven.
10. Remember that your blood pressure is subject to
natural variation. The pressure is highest under
stress and lowest when you sleep.
11. Ask your doctor to explain your state of health
and the blood pressure range before you start
making measurements at home.
12. If you suffer from disease, such as:
arteriosclerosis, diabetes, liver or kidney problems,
circulatory disorder or hypertension, consult your
doctor before using the blood pressure monitor.
13. During the measurement, the device displays
possible cardiac arrhythmia such as arterial or
ventricular extrasystoles or atrial fibrillation.
14. If you do not tolerate the measurement for any
reason, press the ON/OFF button to switch off the
device and deflate the cuff immediately.
15. Handicapped individuals should not themselves
measure their blood pressure.
16. Do not make changes to the device or the cuff.
Stop using the device when you believe that it is
defective.
- 4 -
7. When the device is switched off, the measuring
values are stored.
8. Close the lock of the ON/OFF button.
The memory function
1. Open the lock of the ON/OFF button.
2. With the User button, go to the memory of the user
whose value you want to display.
3. Display the measuring values in the memory with
the MEMORY button.
4. The value stored last in the memory is displayed
(it is placed at the highest memory location).
Deleting a value from the memory
With the MEMORY button, go to the blood pressure
value which you want to delete. Instantly press and
hold (at least 4 seconds!!!) the ON/OFF button and
the display will show: dEL (delete) and the number of
the memory location. To delete the value, press the
ON/OFF button instantly.
Deleting all values in the memory
With the MEMORY button, go to any blood pressure
value. Instantly press and hold (at least 4 seconds!!!)
the ON/OFF button and the display will show: dEL
(delete) and the number of the memory location.
Instantly press the MEMORY button and dEL
(delete) and ALL (for all memory locations) will be
displayed.
Instantly press the ON/OFF button and all values are
deleted. Time and date are not deleted.
- 13 -