User manual

Care and maintenance
1. Do not drop the device; it is not resistant to impact.
2. Do not remove or modify the device or the cuff. Do
not twist the cuff.
3. Avoid direct sunshine, high temperatures,
moisture, dust and dirt.
4. Do not use thinner, petroleum ether or other
aggressive cleaner.
5. Do not wash the cuff or immerse the cuff in water.
Cleaning
1. Clean the device with a cloth moistened with water
or a neutral cleaner. Wipe it dry after cleaning.
2. Stains on the cuff can be removed carefully with a
moist cloth and soap solution.
Regular recalibration
No checks of the measuring accuracy of the SC
7400 NFC are normally required. Devices used in
medical practice in Germany must be checked after
2 years according to applicable legislation.
Information can be obtained from our customer
service.
- 14 -
Specific features of the SC 7400 NFC
- The product uses most advanced technology for
reliability in blood pressure measurement. The blood
pressure is measured while the cuff is inflating (smart
logic).
- No need ever to worry about batteries. The product
has a built-in lithium power source.
- Data can be transferred to a smart phone/tablet by
NFC (if an NFC capable smart phone/tablet is
used). For this, install the free BPM OUcare app.
- At rest, the product
displays the time and the
room temperature.
Precautions
1. Do not overinflate the cuff because the pressure
on the arm will be painful.
2. Open the velcro fastener when the inflation
pressure is higher than 300 mmHg.
3. Keep the blood pressure monitor out of reach of
children to avoid misuse.
4. The BP monitor is not a substitute to your visit to a
doctor. Diagnosing and treating a disease and
prescribing drugs are the doctor’s job.
5. The BP monitor cannot work as it normally should
when it is used outside the specified temperature
and humidity ranges (see Technical Specifications).
- 3 -