Instructions

1. Turn on the device then the device is ready for
forehead measuring
2. Press and hold M button until LCD shows "For" and
forehead icon.
3. Press and hold M button again for 2 seconds to switch
back
4. The measuring site icon flashes twice and it means the
mode change is successful.
Changing Setting
- The beeps can be set.
5. Press and release M button again to enter beeps
on/off mode.
6. The “-” flashes for 3 times then LCD shows on, press
and release M button to turn on or off the beeps.
The beep default is on.
- The offset can be set.
7. Per above, then press and release
M button again to enter offset mode.
8. After flashing, press and
release M button to turn off this
setting
GB-10
Speicher-Anzeige
Gerät schaltet aus
Stirn-Messung
Nummer der Benannten Stelle (TÜV
Rheinland LGA Products GmbH)
Bitte Gebrauchsanweisung lesen
Vor Feuchtigkeit schützen
Anwendungsteil BF
Warnhinweise
Entsorgungshinweise
Herstellungsdatum (Monat/Jahr)
Hersteller
Europa-Repräsentant
Ein/Mess-Taste
M
MEMORY-Taste
D-7