User Guide

Join an existing pack
The easiest way to join a pack is via the Cardo SmartSet App, while the Pack Creator is
nearby and in DMC pairing mode. The process can also be done from the Advanced
Features Menu in Standby mode.
Alternatively, make sure your unit is in DMC intercom mode and that you are within
3 m / 10 ft. from the Pack Creator. While the Pack Creator is in Grouping mode, press
v
for 5 seconds on your unit.
A Purple LED indicates that grouping with the Pack Creator has been successful.
A Yellow LED indicates that the pack is full and no additional members can join.
Using DMC intercom
With the SMARTPACK, up to 4 riders can participate in a pack, with all pack members
able to speak and hear everyone else. Once you are in a pack, you can start talking to
other members of your pack instantly.
Mute the pack
If for any reason you would like to mute the conversation but still remain a pack
member, press
v
for 2 seconds. Tap
v
to rejoin the conversation.
Leaving a pack
If your connection is lost for any reason, you will remain a member of the pack until
your SMARTPACK unit can reconnect to any of the other members of the pack.
If you choose to leave the pack you can:
• Use the Cardo SmartSet App.
• Choose ‘Leave the Pack’ in the Advanced Features Menu in Standby mode
• Join a new pack
Rejoining a pack
If you have joined a dierent pack or chosen to leave a pack, and later wish to rejoin
the original pack, simply pair your unit with the Pack Creator again. If the Pack Creator
is no longer available, a new pack should be created and all members should pair
again to the new Pack Creator.
| 17
English