Operating instructions

Section 7

MAINTENANCE

7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS

* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions

HOURS

Break-In 8 40 100 200 500 Procedure Comments

(First 10)

X Check all hardware for tightness

X Check hydraulic oil level See paragraph 7.3

X Check all belts for proper alignment See paragraph 7.8

X Change engine oil and filter See paragraph 7.4

(First 20)

X Check hydraulic hoses for leaks Use extreme caution when

checking the hydraulic hoses

See paragraph 2.5

X Check coolant level (Kawasaki & Briggs) See paragraph 7.12

X Check engine oil level See paragraph 7.4

X *Clean mower See paragraph 7.13

X Check condition of blades See paragraph 7.9

X Apply grease to fittings See paragraph 7.2

X Check tire pressure See paragraph 7.10

X Check coolant level (Kawasaki only) See paragraph 7.12

X Inspect seat belt for wear or damage See paragraph 2.5

X Check battery electrolyte level, See paragraph 7.7

clean battery posts and cables

X Check belts for proper alignment See paragraph 7.8

X Apply grease to fittings See paragraph 7.2

X Change engine oil See paragraph 7.4

X *Clean air cleaner element See paragraph 7.6

X Check lubricant in cutter deck gearbox See paragraph 7.11