HDMI Extender Series User Manual Model : HE01F-4K Compact 4K HDMI Fiber Extender Smart Cabling & Transmission Corp. V1.
User Manual HE01F-4K Introduction HE01F-4K is an HDMI extender that uses a single fiber optic cable with LC connections to transmit uncompressed 4K 30Hz HDMI signals, with EDID and HDCP signals supported for both multi-mode and single-mode fibers. This small compact size allows you to easily finish installation for any audiovisual applications. Features Resolution up to 4K@30Hz. Transmission distance up to 1KM over single-mode fibers, 300m over multi-mode fibers. Built-in LC Fiber Connector.
User Manual HE01F-4K Panel view . No Interface Description 1 HDMI Type-A Connector To connect an HDMI device 2 LED Indicator To indicate power & Link status 3 LC Optical Connector To connect a single/ multi-mode fiber cable 4 Micro USB Connector To input 5V 2A power Installation Guide 1. Connect HE01FT-4K (The transmitter) to an HDMI source. 2. Connect the optical fiber cable to HE01FT-4K. 3. Power on HE01FT-4K from the micro-USB port. 4.
User Manual HE01F-4K Caution The product DOES NOT support CEC due to EDID pass-through. To support CEC, please contact us for customization. This product is designed for indoor applications. If it is desired for outdoor use, please install additional equipment for waterproof protection and surge protectors to prevent damages caused by lighting. Both transmitter and receiver have to be powered through a micro-USB port.
User Manual HE01F-4K Specification Model HE01FT-4K HE01FR-4K Compliance Standard HDCP 1.4, 3D, DDC Video Resolution 4K@30Hz 4:4:4 Data Rate 10Gbps Transmission Distance Wavelength 1 KM over single-mode fiber 300M over multi-mode fiber 1310nm 1550nm Ports & Interfaces Video Input 1 x HDMI Type-A 1 x LC Fiber Connector Video Output 1 x LC Fiber Connector 1 x HDMI Type-A Power Input 1 x Micro USB 1 x Micro USB Power Supply 5V 2A 5V 2A Power Consumption < 1.5W < 1.
