Operating instructions

APPENDIX B
73
FIELD INSTALLABLE ACCESSORIES AND OPTIONS
All accessories/options listed below are available in kits for field installation.
Kits contain all parts and hardware with detailed installation instructions. To
order accessories/options, please provide the following information for each kit:
• Factory part number and description, from the table below
• Model number and serial number of your battery charger
• Quantity required
Contact your sales representative to place an order for accessories/options.
Description Kit Part Number
Auxiliary Alarm Relay PC Board (A5) EI0213-02
Standard DC Output Filtering (30 mV with battery) contact your sales rep.
Battery Eliminator Filtering contact your sales rep.
External Temperature Compensation Probe Assembly (A10) see table below
AC Input Lightning Arrestor (VR3) EJ1074-00
Copper Ground Buss with one (1) box lug contact your sales rep.
Wall-Mounting Kit for Style-5018 Cabinet EI5008-00
23-24in Relay Rack-Mounting Kit for Style-5018 EI0193-03
Drip Shield Assembly for Style-5018 Cabinet EI0191-02
DNP3 Level 2 / Modbus Communications Module see Appendix E
External Temperature Compensation Probe Assembly
The temperature compensation assembly consists of two (2) components:
1. To order a replacement probe (or puck), request part number EJ5032-00. This
probe is good for all charger output voltages and all battery types.
2. The standard temperature compensation assembly is supplied with a 25ft / 7.6m
interconnection cable. If you need a longer cable, order it from the table below, which
also shows the ordering part number for a complete probe kit.
Temperature Compensation Probe Kits
Cable Length
(feet / m)
Kit Part Number
(includes probe)
Replacement Cable
Part Number
25 / 7.6 EJ5033-00 EJ5011-00
50 / 15.2 EJ5033-01 EJ5011-01
100 / 30.5 EJ5033-02 EJ5011-02
200 / 61.0 EJ5033-03 EJ5011-03
Use a single cable assembly. Do not try to splice cables together to increase the length.