Specifications

56 CBI Buffer Formats HighWire MTP-2 - 1.2, September 4, 2002
aerm
aermaerm
aerm
Alignment Error Rate Monitor (AERM) parameters (used during proving).
aerm.aerm_tin
aerm_tinaerm_tin
aerm_tin
Q703 AERM Tin parameter. Normal-mode threshold of the (AERM)
counter.
aerm.aerm_tie
aerm_tieaerm_tie
aerm_tie
Q703 AERM Tie parameter. Emergency-mode threshold of the (AERM)
counter.
aerm.aerm_n
aerm_naerm_n
aerm_n
Q703 AERM N parameter. The number of octets that causes an increment
of the AERM counter while in “octet counting” mode.
in_service_monitor
in_service_monitorin_service_monitor
in_service_monitor
Type of monitor to use while in the In Service state. Typically this value is the
SUERM for lower speed links and the EIM for higher speed links. This field can
take the following values:
CBI_IN_SERVICE_SUERM
This value instructs the L2 to use the SUERM as its In Service error
monitor.
CBI_IN_SERVICE_EIM
This value instructs the L2 to use the EIM as its In Service error monitor.
suerm
suermsuerm
suerm
Signal Unit Error Rate Monitor (SUERM) parameters. Ignored if the EIM is the
configured In Service monitor.
suerm.suerm_t
suerm_tsuerm_t
suerm_t
Q703 SUERM T parameter. Threshold of the SUERM counter.
suerm.suerm_d
suerm_dsuerm_d
suerm_d
Q703 SUERM D parameter. Number of octets received for each
decrement of the SUERM counter.
suerm.suerm_n
suerm_nsuerm_n
suerm_n
Q703 SUERM N parameter. The number of octets that causes an
increment of the SUERM counter while in “octet counting” mode.
eim
eimeim
eim
Errored Interval Monitor (EIM) parameters. Ignored if the SUERM is the
configured In Service monitor.
eim.eim_te
eim_teeim_te
eim_te
Q703 EIM TE parameter. Threshold of the EIM counter.
eim.eim_t8
eim_t8eim_t8
eim_t8
Q703 EIM T8 parameter. Monitoring interval, in milliseconds, between
each adjustment of the EIM counter.