Specifications

HighWire MTP-2 - 1.2, September 4, 2002 Table of Manpages 147
10. Appendix C: Manpages
Manpages in HTML format are available on the CDROM. These files are
located in the </manpages/> directory off of the CDROM's main directory.
The front page of the CDROM has a reference link to the manpage index file
<manpages/manpages.htm>.
When the package is installed on a system, the manpages index and files can
be found at directory </opt/SBEhw/doc> as a file </opt/SBEhw/doc/
manpages.htm>. The manpages are also installed in nroff format in the
standard user man directories.
10-1. Table of Manpages
Table 10-1 lists the manpages included with HighWire MTP2.
Table 10-1 Manpages
Maintenance Commands
hw_daemon(1M) SBE HighWire Support Package Multi-Board Control Daemon
hwcmd (1M) SBE HighWire Support Package Command Utility
hwinfo (1M) SBE HighWire Support Package Information Display Utility
hwstat (1M) SBE HighWire Support Package Statistics Display Utility
highwire.rcm(1M) script for Reconfiguration and Coordination Manager support
wspcmd (1M) SBE HighWire Support Package Commander Utility
wspd (1M) SBE HighWire Support Package Controller Daemon
SBE libsbe Library Functions
libsbe (3) SBE HighWire Support Package Standard Library
sbe_BoardReady (3X) used to determine if a board is ready to receive messages
sbe_CtlOpen (3X) initialize the HighWire control device library
sbe_CtlClose (3X) clean up the HighWire control device library
sbe_CtlIssueMsg (3X) send an Ioctl to the SBE HighWire control device
sbe_CtlRcvMsg (3X) receive an Ioctl from the SBE HighWire control device
sbe_dataOpen (3X) open the HighWire Streams data device for reading or writing