Specifications

HighWire MTP-2 - 1.2, September 4, 2002 L1_FRAMING 145
9-17. L1_FRAMING
This field specifies the type of framing to set when MTP3 Stub receives
M2_OPEN request. These codes are used on the Cross Bus Interface (CBI)
only.
9-18. L1_CLOCKING
This field specifies the type of clocking to use on the L1 framers. Used on
Cross Bus Interface (CBI) only.
9-19. L1_LINE_TYPE
This field specifies the physical line type for each of the framers on the line
card.
CBI_L1_FRAMING Value
CBI_L1_FRAMING_NONE 0
CBI_L1_FRAMING_E1 1
CBI_L1_FRAMING_T1 2
CBI_L1_CLOCKING Value
CBI_L1_CLOCKING_LOOP 1
CBI_L1_CLOCKING_LOCAL 2
CBI_L1_CLOCKING_THROUGH 3
CBI_L1_LINE_TYPE Value
CBI_HM_DS1LF_D4 1
CBI_HM_DS1LF_D4_MF 2
CBI_HM_DS1LF_ESF 3
CBI_HM_DS1LF_ESF_MF 4
CBI_HM_DS1LF_E1 5
CBI_HM_DS1LF_E1_CRC 6
CBI_HM_DS1LF_E1_MF 7
CBI_HM_DS1LF_E1_CRC_MF 8