Specifications

HighWire MTP-2 - 1.2, September 4, 2002 sbe_dprIoctl 119
Arg points to a MAP structure with the following elements:
UINT32 fromDev Source time slot made up by using the macros
PUT_TIMESLOT(t) | PUT_CHAN(c) | PUT_DEVICE(d)
UINT32 toDev Destination time slot made up by using the above
macros.
UINT32 mode TSI transmission mode for connect as follows:
TTSI_LOWLAT Low-latency mode
TTSI_FRAMEI Frame-integrity mode
TTSI_HOST Host data substitution mode
TTSI_IDLE1 Put idle code1 on the TDM highway
TTSI_IDLE2 Put idle code2 on the TDM highway
TTSI_IDLE3 Put idle code3 on the TDM highway
TTSI_TESTPAT Put test pattern on the TDM highway
TTSI_TRISTATE Tri-state the TDM highway
INT32 connected 1 - TDM highway connection; 0 - disconnected; −1 - N/A
UINT32 ct_xmit_enable 1 - enable; 0 - disable
INT32 local_TSA_line The local TSA TDM highway number (0-7) or −1 for N/A