Specifications

18 Specifications HW400p/M Technical Reference - 1.0, March 6, 2002
Industry Canada CS03 PENDING
Note: The Industry Canada label identifies certified equipment. This
certification means that the equipment meets telecommunications network
protective, operational and safety requirements as prescribed in the
appropriate Terminal Equipment Technical Requirements document(s). The
Department does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing the equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an accepted method of connection.
The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or any equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Caution! For their own protection, users should ensure that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas. Users should not attempt to make such
connections themselves, but should contact the local electrical inspection
authority or electrician, as appropriate.
Manufacturer SBE, Inc.
Model name HW400p/M
CS-03 Tests conducted by TUV Telecom
1775 Old Highway 8 NW
Suites 107 & 108
St. Paul, MN 55112-1891
Report dated PENDING
Report number PENDING
Certifications number PENDING
Agency compliance The HW400p/M is designed to comply with the following standards or
requirements:
•NEBs
•VCCI