Operating instructions

Configuring endpoint policy groups media rules
Clone an existing media rule as a starting point or create a new one. Do not change the
default.
Media rules are defined under System Management > Domain Policies > Media Rules. The
requirements for media rules are as follows.
• It is recommended to clone a profile like the default-low-med profile. The default Media
Rule has the Media QoS setting of DSCP EF enabled.
• When you create a new media rule, the default is . This must be changed tor another
option that meets the current requirements.
• On the Media Encryption tab, set the SBC to RTP or SRTP to an endpoint or IP Office.
For Media Encryption, set the preferred Audio Format as RTP in the rule for IP Office.
Towards the endpoints, the rule used can be set to SRTP if the endpoint supports it.
Otherwise use RTP. Ensure Encrypted RTCP is unchecked and Interworking is checked.
For Video ensure RTP is selected.
• For all other tabs, use the default settings.
Configuring endpoint policy groups signalling rules
Clone an existing media rule as a starting point or create a new one. Do not change the
default.
Media rules are defined under System Management > Domain Policies > Signalling
Rules. The requirements for signalling rules are as follows.
• It is recommended to clone a profile like the default-low-med profile. The default Media
Rule has the Signalling QoS setting of DSCP AF41 enabled.
• When you create a new signalling rule, the default is TOS. This must be changed to DSCP
AF41 or another option that meets the current requirements.
• For all other tabs, use the default settings.
Configuring Session Border Controller Enterprise for IP Office Remote Workers
20 Configuring the Avaya Session Border Controller for IP Office Remote Workers September 2013
Comments? [e-mail]