Operating instructions

Procedure
1. In the navigation tree on the left, expand System Management.
2. Select Device Specific Settings and then Global Profiles.
3. Select Phone Interworking.
4. Select the avaya-ru profile and click Clone.
5. Enter a name for the profile and click Finish.
Configuring the call server
Before you begin
You must be logged into the SBCE Control Center as Admin.
Procedure
1. In the navigation tree on the left, expand System Management.
2. Select Device Specific Settings and then Global Profiles.
3. Select Server Configuration.
4. Click Add.
5. Enter a name.
6. In the Server Type field, select Call Server from the pull down menu.
7. In the IP Addresses field, the IP Office IP address.
8. Check the Supported Transports you want to use.
TCP is required for remote worker but you may have UDP if you are also using the
SBC for SIP trunks.
9. In the Transport Port fields enter the port to be used (for example port 5060).
10. Click Next three times.
11. Do not enable Grooming. IP Office uses different TCP connections to each
endpoint.
12. For the interworking profile, choose avaya-ru or a cloned version of it.
13. Click Finish.
Configuring Session Border Controller Enterprise for IP Office Remote Workers
16 Configuring the Avaya Session Border Controller for IP Office Remote Workers September 2013
Comments? [e-mail]