Operating instructions

TCP port 5060 is the required transport for remote workers on IP Office.
7. Click Add.
8. Enter the name for external interface and the select the B1 IP address from the pull
down menu.
9. For the transport to be used on that interface, put in the port in the chosen transport
field or fields and click Finish.
TCP port 5060 is the required transport for remote workers on IP Office.
10. TLS port 5061 is the preferred transport for remote worker towards the Avaya
endpoints if the endpoint supports it. If using TLS, select the default Avaya TLS
server profile on the external interface. If the endpoint doesn’t support TLS, then
use TCP and look at the IP Office remote worker guides for Flare and one-X Mobile
clients for information on protocols to use.
Configuring server interworking profiles
Before you begin
You must be logged into the SBCE Control Center as Admin.
Procedure
1. In the navigation tree on the left, expand System Management.
2. Select Device Specific Settings and then Global Profiles.
3. Select Server Interworking.
4. The profile used for remote workers on the IP Office is avaya-ru server interworking.
Highlight the avaya-ru profile.
5. Click Clone.
6. Enter a name for the profile and click Finish.
Configuring phone interworking profiles
Before you begin
You must be logged into the SBCE Control Center as Admin.
Configuring server interworking profiles
Configuring the Avaya Session Border Controller for IP Office Remote Workers September 2013 15