Operating instructions

Configuring media interfaces
Before you begin
You must be logged into the SBCE Control Center as Admin.
Procedure
1. In the navigation tree on the left, expand System Management.
2. Select Device Specific Settings and then Media Interfaces.
3. Click Add.
4. Enter the name for internal interface and then select the A1 IP address from the pull
down menu.
5. Enter the media port range and click Finish.
The default port range used is 35000-40000.
6. Click Add.
7. Enter the name for external interface and then select the B1 IP address from the
pull down menu.
8. Enter the media port range and click Finish.
The default port range used is 35000-40000.
Configuring signalling interfaces
Procedure
1. Login to the SBCE Control Center as Admin.
2. In the navigation tree on the left, expand System Management.
3. Select Device Specific Settings and then Signalling Interfaces.
4. Click Add.
5. Enter the name for internal interface and the select the A1 IP address from the pull
down menu.
6. For the transport to be used on that interface, put in the port in the chosen transport
field or fields and click Finish.
Configuring Session Border Controller Enterprise for IP Office Remote Workers
14 Configuring the Avaya Session Border Controller for IP Office Remote Workers September 2013
Comments? [e-mail]