User guide

2. At the voice prompt press 2 to download program-
ming. You will see the next screen, please wait. (No
more than ten seconds).
3. When the screen displays the prompt, Do you
have a passcode? select the No.
390/480 P
hone for AltiGen User Guide
5
Installation
7. Insert number card
Write your telephone number on the number card, and
place it into the card slot on the telephone, located
under the mouthpiece in the handset cradle. Gently
bend the clear plastic lens into the slot, over the num-
ber card.
Screen and Softkey Setup
After phone is plugged in and powered up, lift the
Handset. If softkey
‡
labels appear on the screen as
shown next, your phone set up is complete. If this is
the case, skip to Screen States and Softkeys.
If softkey labels do not appear on screen:
1. Please dial 1-866-732-8791 (toll free for most States
within North America) or 604-629-4976 to program
your phone
390/480 P
hone for AltiGen User Guide
4
‡
The softkeys are the 6 buttons on either side of the screen. The
softkey labels are the text that appears beside the buttons
Getting CPE ID...
Do you have a
passcode
-Yes
No-
Quit-