User guide

Changing a Number in the Callers List
before Dialing................................................................................52
Deleting an Entry in the Callers List ........................................53
Deleting all Entries in the Callers List ......................................53
FAQ..............................................................................................................53
Limited Warranty ....................................................................................57
Exclusions ............................................................................................57
Warranty Repair Services....................................................................57
After Warranty Service........................................................................57
Important Safety Instructions ............................................................58
Installation ............................................................................................58
Use ........................................................................................................59
US Regulations - Please Read Carefully..........................................61
Federal Communications Commission (FCC) Notice ..................61
EMI/EMC (FCC Part 15)..................................................................63
390/480 P
hone for AltiGen User Guide
vi
390/480 P
hone for AltiGen User Guide
1
Introduction
This manual covers the use of the 390 and 480 phones
programmed for AltiGen phone system. This program-
ming provides an easy-to-use interface through the
phones’ large screens and 6 softkeys. By using this
interface you no longer have to remember all the phone
feature codes to perform functions such as call han-
dling, or extension management.
This manual should therefore be used in place of the
"Telephone User Interface Quick Reference" provided
with the phone. Please continue to refer to your
AltiServ Users Guide for all other AltiServ features.
Installation
1. Connect the handset cord
Turn the telephone over and locate the handset jack
marked . Insert one end
of handset cord into the
jack until it
clicks into
place. Then
route the
handset cord
through the
groove as
shown in the
illustration.
Attach the
handset to the
other end of
the handset
cord.