User guide

After 2 rings, you will be connected to the remote
extension and can speak through its speaker.
When you are finished speaking, press the Hangup
softkey and your phone will hang up. The remote
extension will also hang up automatically. 12
Workgroup Options
Press the More softkey form the Idle State screen,
then the WorkGrp softkey and you will see the
Workgroup Options.
WGLogin – Workgroup Login
For workgroup members only: Logs in to a workgroup.
WGLogout – Workgroup Logout
Log out and block workgroup calls but receive other
calls at your extension.
Ready – Status Ready
This softkey tells the system that your extension is
390/480 P
hone for AltiGen User Guide
25
Softkeys & Screen States
Paging Menu Screen
Paging
To see the Paging Options screen please press the
Paging softkey on the Idle screen, if you have a
Sayson phone with basic programming. If you have a
Sayson Plus phone from the Idle Screen please press
the More options and then the Paging softkey.
AudPage — Overhead Paging
‡
Use the AudPage softkey to connect to the overhead
broadcast system. Speak into the handset and hang up
when finished.
TrkPage – Overhead Zone Paging
You can use this key to perform overhead zone paging.
Simply press this softkey, then the 2-digit paging ID of
the zone you wish to page.
390/480 P
hone for AltiGen User Guide
24
‡
Note: An internal public address system or a zoned public address
must be installed and connected to the AltiGen system to use these
features.
‡
Note: If the remote phone doesn't answer or doesn't hang up after
you press the Hangup softkey, please contact your administrator to
configure the remote extension correctly for intercom.