User guide

Intercom

‡

You can Intercom other Sayson Plus phones on your

AltiServ system.

1. Press the Intrcom softkey.

2. Enter the extension you wish to call.

3. Press the

Done softkey.

390/480 P

hone for AltiGen User Guide

Softkeys & Screen States

390/480 P

hone for AltiGen User Guide

administrator to make sure the Sayson software has been

installed on your server.

To retrieve the call:

1. Use the and buttons to move the cursor

to the call you want to retrieve.

2. Press the Pickup softkey to retrieve the call.

If you want to see caller’s name and by whom the call

was parked, you can use the button.

You can also retrieve calls from this screen using the

same procedure. Use the button to go back to the

first screen

Label Definition

# System Park Number

Caller ID Phone number of parked caller

Time Time when call was parked in

24 hr format

Name Name of Parked Caller (if available

through caller ID service)

Parked by Extension and name of person that

originally parked the call

Pickup Softkey retrieves the parked call

Refresh Softkey updates the list of parked

calls

Hangup Exit Syspark+ feature and return

phone to idle state.

‡

Requires the 12 port PCI Analog Station Board (ALTI-TTAS-12)

installed on the AltiGen system. Any phone on the system can inter-

com the latest Sayson phone. If an extension is not connected to the

12 port PCI Analog Station Board and is intercommed, it will ring

and go into voice.