User Manual
36
Tighten the lock ring to the manufacturer
specied torque. You nd the torque
specication on the calibration certicate or
canndgetitdirectlyfromthemanufacturer
of the crankset.
Models with mounting bolts (e.g., FSA
Gossamer and K-Force Light Megaexo, SRAM
Force22, SRAM S900):
If required, put a drop of medium thread-
locking adhesive (e.g., Loctite 243) on the
mounting bolts. If the mounting bolts are
already coated with thread-locking adhesive
this is not required.
Tighten the mountain bolts to the
manufacturer-specied installation torque.
You nd the installation torque on the
calibrationcerticate.
7. Mount the complete crankset on the
bike. Follow the manufacturer installation
instructions. If required, these can be found
on the power2max website or on the site
of the manufacturer. Check the functioning
of the front derailleur after installation and
adjust as required.
IMPORTANT: follow manufacturer instal-
lation instructions.