User manual

Sawgrass Technologies, Inc. SubliJet IQ

Getting Started Guide for the EPSON Stylus PRO 4000

Setup Instructions – Windows 2000 and XP

Product Overview

PowerDriver IQ and PowerDriver XG are color management software

solutions that have been written as a Windows printer driver. It is

designed to work with Epson ink-jet printers and Sawgrass sublimation

ink. The installation program will install Sawgrass color management

software, the Sawgrass PowerDriver IQ / XG printer driver software, and

ColorSure tools and utilities.

Quick Start

1. Unpack and setup printer as described in the Epson manual.

2. Install the Epson printer driver and verify printer operation.

3. Insert the PowerDriver IQ or PowerDriver XG CD into the

CDROM drive on the computer and install PowerDriver.

Step By Step Installation

To get started printing as soon as possible, these are the steps

Sawgrass recommends you perform while setting up your sublimation

printer driver software.

1. Setup the printer according to the Epson instructions.

2. Install your Sawgrass SubliJet ink cartridges.

3. Install the Epson printer driver according to the Epson user’s

manual.

4. After the Epson driver is installed, check to see which port the

printer is set to:

a. In XP you can do this by clicking on Start, Printers and

Faxes. For XP with the Classic menu enabled or

Windows 2000, click Start, Settings, Printers.

b. Right click on the Epson printer you just installed and

click on the Properties option.

c. Select the Ports tab and write down the port the printer is

assigned to. You will use this later in the PowerDriver IQ

software installation.