User guide

Sawgrass Technologies, Inc. SubliJet IQ

Getting Started Guide for the EPSON Stylus Photo 1280

2. The connectors are color-coded for easy identification. Find the black connector.

Remove the plastic cap from the black ink bag and insert the male connector into the

female connector on the tubing. See Fig 2. Once the black bag is attached, attach the

rest of the ink bags to their corresponding colored tube.

3. Once all of the bags are attached to the QuickConnect system place the bags into the

ink rack. The rack has color coded dots for each bag.

a. Hold the female connector of the black bag and 3-4 inches of tubing above

the corresponding position in the ink rack. See Fig. 3.

b. Slide the tubing into the slot and place the female connector firmly into the

round opening. See Fig. 4.

c. Place the bag in the holder. See Fig. 5.

d. Repeat steps A-C for all colors of the ink.

Fig. 2

Fig. 3

Remember to match the right color ink to its

corresponding cartridge chamber. Once the

tube is filled, there is no way to undo it!

Fig. 4