User manual

Sawgrass Technologies, Inc. SubliJet IQ
®
Getting Started Guide for the EPSON Stylus Photo 1400/1410
6
Tips for Using the QuickConnect II™ System
Check the support tube connections periodically.
Ensure the support arm is securely attached and not drooping. If the support
arm droops too low, the tubing could scrape the bottom of the printer.
Check the ink level in your ink bags periodically.
As the bags empty, they flatten in appearance. Before beginning a large print
job, check the ink bags to ensure enough ink is available to finish the job.
How to remove the QuickConnect II™ system from the printer:
The bulk ink cartridges sit tightly inside the printer. To remove them, hold the cartridges firmly in
one hand and rock them gently back and forth until they become loose. Lift them gently out of the
printer. The cartridges may drip slightly when removed from the printer. Keep the cartridges
above the level of the ink bags until you are able to plug the exit holes with electrical tape. Please
note the exit port area must be perfectly dry or the tape won’t stick.