Installation and Operation Manual
Table Of Contents
- 1 Devices – an Overview
- 2 Explosion Protection
- 3 Functional Overview
- 4 Ambient Conditions
- 5 Electrical Data
- 6 Mechanical Dimensions and Materials
- 7 Installation and Mounting
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 8 Battery Replacement
- 9 Declaration of Conformity
- 10 Proper Usage
- 11 Setting Up Operation in SAVVY® Synergy Portal
- 12 FCC and ISED related statements
- 13 Storage and Shutdown
© 2019 by SAVVY Telematic Systems AG www.savvy-telematics.com
Version 1.2 07.08.2019 Page 3 of 22
3
Manual SAVVY® CargoTrac-ExR-M1
1 Devices – an Overview
SAVVY® CargoTrac-ExR-M1 is a latest generation state-of-
the-art telematics device. An LTE Cat-M1/NB1 GSM-Cellular
Modem is fully integrated, as well as a highest sensitivity
GNSS receiver for precision positioning. All antennae are
internally included so that no external antenna connections
are required.
A primary battery which ensures, depending on freely selectable configuration, an
autonomous lifespan of up to 15 years, is also included.
An internal acceleration and compass sensor detects movements, shocks, blows,
vibrations and heading.
An internal IEEE802.15.4 radio module enables wireless communication with other
devices like SAVVY® SenseGateway-ExR and SenseGateway-ExR-DMS, sensors,
remote control and other equipment.
SAVVY® CargoTrac-ExR-M1 has an exceptionally low power usage so it meets both
current and possible future environmental regulations.
SAVVY® CargoTrac-ExR-M1 is fully configurable in every function via the Internet
software SAVVY® Synergy and can therefore meet all customer and system
requirements exactly. All configurations and firmware updates occur wireless.
SAVVY® CargoTrac-ExR-M1 meets the requirements according to IEC60079-0 Ed.7,
IEC60079-11 Ed.6, EN60079-0:2012+A11:2013, EN60079-11:2012