Installation and Operation Manual
Table Of Contents
- 1 Devices – an Overview
- 2 Explosion Protection
- 3 Functional Overview
- 4 Ambient Conditions
- 5 Electrical Data
- 6 Mechanical Dimensions and Materials
- 7 Installation and Mounting
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 8 Battery Replacement
- 9 Declaration of Conformity
- 10 Proper Usage
- 11 Setting Up Operation in SAVVY® Synergy Portal
- 12 FCC and ISED related statements
- 13 Storage and Shutdown
© 2019 by SAVVY Telematic Systems AG www.savvy-telematics.com
Version 1.2 07.08.2019 Page 22 of 22
22
Manual SAVVY® CargoTrac-ExR-M1
13 Storage and Shutdown
13.1 Storage
CargoTrac-ExR-M1 is delivered so storage over a longer period of time is
unproblematic. The internal battery uses very little energy during storage. Please note
that items must be stored at temperatures between +10°C bis +30°C; humidity must
not exceed 60%rH.
13.2 Shutdown and Disposal
CargoTrac-ExR-M1 must not be removed from service and
shut down in potentially explosive areas!
The internal battery must not be removed in potentially
explosive areas!
The device and the mounting brackets can be disposed of separately. The mounting
brackets are made of steel or stainless steel and can be recycled at a metal recycling
site.
The device itself can be taken to a collection site for electronic scrap or sent back to
the following address:
For Germany / EU: SAVVY Telematic Systems AG
c/o LogConnect AG
Zollstrasse 5
DE-78239 Rielasingen
For Switzerland: SAVVY Telematic Systems AG
Grabenstrasse 9
8200 Schaffhausen
Thank you for contributing to a better environment and making sure your waste is
disposed of properly!