Installation and Operation Manual
Table Of Contents
- 1 Devices – an Overview
- 2 Explosion Protection
- 3 Functional Overview
- 4 Ambient Conditions
- 5 Electrical Data
- 6 Mechanical Dimensions and Materials
- 7 Installation and Mounting
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 8 Battery Replacement
- 9 Declaration of Conformity
- 10 Proper Usage
- 11 Setting Up Operation in SAVVY® Synergy Portal
- 12 FCC and ISED related statements
- 13 Storage and Shutdown
© 2019 by SAVVY Telematic Systems AG www.savvy-telematics.com
Version 1.2 07.08.2019 Page 20 of 22
20
Manual SAVVY® CargoTrac-ExR-M1
9 Declaration of Conformity
Available from SAVVY® Telematic Systems AG.
10 Proper Usage
CargoTrac-ExR-M1 is designed for use as an autonomous telematics unit and must
not be used in any way other than described in this manual, the corresponding data
sheet or as instructed by SAVVY® Telematic Systems AG. SAVVY® Telematic
Systems AG refuses to accept any responsibility whatsoever for damage due to
improper use.
11 Setting Up Operation in SAVVY® Synergy Portal
The SAVVY® Synergy Portal puts the device into operation. No physical action on
the device itself at its location is required. More information on putting the device into
operation is available at support@Savvy-telematics.com or under Tel +41 52 633 46
00. The login portal is located here:
https://www.savvy-synergy.com/customers/SynergyEnterprise/