Installation and Operation Manual
Table Of Contents
- 1 Devices – an Overview
- 2 Explosion Protection
- 3 Functional Overview
- 4 Ambient Conditions
- 5 Electrical Data
- 6 Mechanical Dimensions and Materials
- 7 Installation and Mounting
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 8 Battery Replacement
- 9 Declaration of Conformity
- 10 Proper Usage
- 11 Setting Up Operation in SAVVY® Synergy Portal
- 12 FCC and ISED related statements
- 13 Storage and Shutdown
© 2019 by SAVVY Telematic Systems AG www.savvy-telematics.com
Version 1.2 07.08.2019 Page 18 of 22
18
Manual SAVVY® CargoTrac-ExR-M1
• Fully insert the battery plug belonging to the new battery and place the battery
in the case as illustrated.
• Make sure the plug lock is in place when you insert the plug.
• Check to see if the gasket is in the correct position.
• Make sure the gasket is undisturbed by the battery cable and other objects.
• Close the device again with the base plate and tighten each of the ten screws
to 2.0Nm.
• Each screw must not overtighten!
• The used battery can be disposed of at any suitable collection point.
TORX-T20 2.0Nm