Installation and Operation Manual
Table Of Contents
- 1 Devices – an Overview
- 2 Explosion Protection
- 3 Functional Overview
- 4 Ambient Conditions
- 5 Electrical Data
- 6 Mechanical Dimensions and Materials
- 7 Installation and Mounting
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 8 Battery Replacement
- 9 Declaration of Conformity
- 10 Proper Usage
- 11 Setting Up Operation in SAVVY® Synergy Portal
- 12 FCC and ISED related statements
- 13 Storage and Shutdown
© 2019 by SAVVY Telematic Systems AG www.savvy-telematics.com
Version 1.2 07.08.2019 Page 13 of 22
13
Manual SAVVY® CargoTrac-ExR-M1
7.6 Mounting Options
The device can be mounted without adapter or with available welding adapter in
various steel versions.
7.6.1 Mounting without an adapter
CargoTrac-ExR-M1 has a sturdy base plate made of stainless steel equipped with
three mounting tabs with holes measuring 6.8mm in diameter so the device can be
mounted using screws or rivets.
Never weld the device base plate directly onto the installation
location!
The heat generated by the welding will destroy the plastic case!
Always take care that mounting the unit will be on a completely flat
surface and that it is never any force on the mounting tabs. Twisting
or deforming the base plate can cause damage to the housing and
leads to water intrusion. Warranty will be lost! This is also safety
relevant!