SDS

Safety Data Sheet
TERLURAN® GP-22 NATURAL
Revision date : 2011/12/02 Page: 5/9
Version: 2.0 (30057689/SDS_GEN_US/EN)
Partitioning coefficient
n-octanol/water (log Pow):
not applicable
not applicable
Viscosity, dynamic:
not relevant
Solubility in water: insoluble
10. Stability and Reactivity
Conditions to avoid:
Avoid extreme heat. Avoid all sources of ignition: heat, sparks, open flame.
Substances to avoid:
strong oxidizing agents
Hazardous reactions:
No hazardous reactions known.
Decomposition products:
Hazardous decomposition products: hydrogen cyanide, monomers, hydrocarbons, gases/vapours, cyclic low
molecular weight oligomers, oxides, Gaseous products of degradation can be given off if the product is greatly
overheated.
Thermal decomposition:
approx. 300 °C
To avoid thermal decomposition, do not overheat.
Corrosion to metals:
No corrosive effect on metal.
Oxidizing properties:
not fire-propagating
11. Toxicological information
Acute toxicity
Information on: acrylonitrile
Assessment of acute toxicity:
Of high toxicity after short-term inhalation. Of high toxicity after short-term skin contact. Of high toxicity after
single ingestion.
Information on: Styrene
Assessment of acute toxicity:
Of moderate toxicity after short-term inhalation. High concentrations in the air may cause narcosis. Virtually
nontoxic after a single skin contact. Virtually nontoxic after a single ingestion. Harmful: may cause lung damage
if swallowed.
Information on: Styrene, acrylonitrile, 1,3-butadiene decomp.
----------------------------------
Oral:
No data available concerning acute toxicity.
Dermal:
No data available concerning acute toxicity.
Irritation / corrosion