SDS

Safety Data Sheet
TERLURAN® GP-22 NATURAL
Revision date : 2011/12/02 Page: 4/9
Version: 2.0 (30057689/SDS_GEN_US/EN)
8. Exposure Controls and Personal Protection
Components with workplace control parameters
OSHA
TWA value 100 ppm ; CLV 200 ppm ; max. conc.
600 ppm ;
Styrene
ACGIH TWA value 20 ppm ; STEL value 40 ppm ;
OSHA TWA value 2 ppm ; STEL value 10 ppm ; OSHA
Action level 1 ppm ; Skin Designation ;
The substance can be absorbed through the skin.
acrylonitrile
ACGIH TWA value 2 ppm ; Skin Designation ;
The substance can be absorbed through the skin.
OSHA TWA value 1 ppm ; STEL value 5 ppm ; OSHA
Action level 0.5 ppm ;
butadiene
ACGIH TWA value 2 ppm ;
OSHA TWA value 100 ppm ; CLV 200 ppm ; max. conc.
600 ppm ;
Styrene
ACGIH TWA value 20 ppm ; STEL value 40 ppm ;
Advice on system design:
Provide local exhaust ventilation to control dusts/vapours.
Personal protective equipment
Respiratory protection:
Wear a NIOSH-certified (or equivalent) particulate respirator. Wear respiratory protection if ventilation is
inadequate. Do not exceed the maximum use concentration for the respirator facepiece/cartridge combination.
Wear a NIOSH-certified (or equivalent) organic vapour/particulate respirator.
Hand protection:
Wear gloves to prevent contact during mechanical processing and/or hot melt conditions.
Eye protection:
Safety glasses with side-shields. Wear splash goggles to protect from hot molten substance/product.
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots,
chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures:
Wear protective clothing to prevent contact during mechanical processing and/or hot melt conditions. Avoid
inhalation of dust. Wash soiled clothing immediately.
9. Physical and Chemical Properties
Form: pellets
Odour: faint specific odour
Colour: The colour is derived from the trade name.
pH value:
not soluble
softening temperature: > 100 °C (DIN EN ISO 306)
onset of boiling: The substance / product decomposes
therefore not determined.
Vapour pressure:
not applicable
Density: approx. 1.04 g/cm3 ( 20 °C, 1 bar) (DIN 53479)
Relative density: 1.06 - 1.08
Bulk density: approx. 600 kg/m3 ( 20 °C, 1 bar) (DIN 53466)
Vapour density: not applicable, The product is a non-volatile
solid.