SDS

_____________________________________________________________________________________________
SB13631408 - ABS GP22 025.000:1 YELLOW Revision Date 21-Sep-2015
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Use personal protection recommended in Section 8. Avoid contact with skin, eyes or
clothing. Wash thoroughly after handling.
Environmental precautions
Environmental precautions
See Section 12 for additional ecological information.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so.
Methods for cleaning up
Avoid creating dust. Take precautionary measures against static discharges. With clean
shovel place material into clean, dry container and cover loosely; move containers from spill
area. Following product recovery, flush area with water.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Handle in accordance with good industrial hygiene and safety practice. Use personal
protection recommended in Section 8. Avoid contact with skin, eyes or clothing. Ensure
adequate ventilation, especially in confined areas. Wear protective clothing to prevent
contact during mechanical processing and /or hot melt conditions. Do not smoke in areas
where polymer dust is present.
Conditions for safe storage, including any incompatibilities
_____________________________________________________________________________________________
Storage Conditions
Keep in a dry, cool and well-ventilated place. Keep container tightly closed. Keep in an area
equipped with sprinklers.
Incompatible materials
Page 5 / 12
Strong oxidizing agents. Strong acids. Strong bases. Finely powdered metals.