Safety Information Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. PRECAUTIONS Use only in a 12-volt DC negative-ground electrical system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
Panel Controls 15 5 1. - Display switch -.Adjust time(long press) 2. - Power on - Mute - Power off(long press) 3. - Enter system menu, 4. - MP3 playback Button 1: - Play/pause - Start play from the beginning of the first track.(long press) Button 2: - Intro play (10 sec.) Button 3: - Track repeat play Button 4: - Track random play Button 5: - MP3 folder down - MP3 track -10 down (long press) Button 6: - MP3 folder up 6 - MP3 track +10 up (long press) - 1-6 Preset: - Press to tune in a preset station.
General Operation Steering Wheel Control Power On/Off Button Auxiliary Input Press the [ ] button to turn the unit on when the vehicle ignition switch is on. Press and hold the button to turn the unit off. To access an auxiliary device: 1. C onnect the portable audio player to the AUX interface on the front panel of the unit. 2. Press the [ SRC ] button to select Aux-In mode. Press [ SRC ] again to cancel Aux-In mode and go to the next mode.
Tuner Operation RDS (Radio Data System) FM/AM(MW) Band RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available. ———————————————————— During radio play, press the [ BAND ] button to choose between three FM and two AM(MW) bands. The indication “AM(MW)” or “FM” appears on the display panel according to your selection.
RDS (Radio Data System) Playing MP3 Files TA: Traffic information can be received from the current station or stations in other network. AF: The frequency list of preset RDS stations is updated by EON data. EON enables the radio to make fuller use of RDS information. It constantly updates the AF list of preset stations, including the one that currently tuned into.
Playing MP3 Files MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write. The unit can not read an MP3 file that has a file extension other than “.mp3”. If you play a non-MP3 file that has the “.mp3” extension, you may hear some noise.
Bluetooth® Operation Note: For your safety, avoid talking on the phone as much as possible while driving. Bluetooth ® is a wireless transmission way for short distance. The built-in Bluetooth ® can connect with the mobile phones having Bluetooth® function. After connecting, you can control your mobile phone through the unit. ———————————————————— Pairing Pairing Use this function to establish a connection between the Dash Dock radio and your Bluetooth® device. 1.
Bluetooth® Operation Music Mode A2DP A2DP is short for Advanced Audio Distribution Profile. The mobile phones supporting this function can transmit stereo audio, whereas the ones not supporting this function can transmit mono audio only. ———————————————————— General Notes for Bluetooth® 1. For some types of mobile phones, during our test, after the mobile phones appear connection successful, the unit still appear waiting for pairing.
System Menu RETUNE-S or RETUNE-L. RETUNE-S or RETUNE-L is time length selection of TA SEEK retune interval. RETUNE-S: Short, TA SEEK retune interval is 45 seconds. RETUNE-L: Long, TA SEEK retune interval is 180 seconds. Remark: RETUNE mode functions for TA during TA SEEK mode only.
Electrical Connections Wiring Diagram Right SWC (Gray) Left SUB OUT(Green) Front MIC RR Location 1 2 3 4 5 6 7 8 12 (Brown) Function Connector A Battery 12V(+) / Yellow ANT/AMP control / Blue with white stripe ILLUMI / Orange/White Stripe ACC+ / Red Ground / Black Connector B Rear Right (+) / Purple Rear Right (-) / Purple with Black Stripe Front Right (+) / Gray Front Right (-) / Gray with Black Stripe Front Left(+) / White Front Left(-) / White with Black Stripe Rear Left (+) / Green Rear Left
Installation Guide Installation Opening Reset This unit can be installed in any dashboard having an opening as shown below. The dashboard should be 4.75mm - 5.56mm thick in order to be able to support the unit. Press the RESET button with a pointed object to reset the unit to the original status. Note: Press the RESET button will erase the clock setting and stored stations.
Troubleshooting The following checklist can help you solve some problems which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell can cause fire or electric shock, immediately stop using it and call the store where you purchased it. Problem General The unit will not switch on. No sound The unit or screen does not work normally.
Specification General Power supply: Maximum power output: Continuous power output: Suitable speaker impedance: Pre-Amp output voltage: Fuse: Dimensions(WxHxD): Weight: Aux-in Sub-out AM(MW) Radio 12V DC (11V-16V) Test voltage 14.4V, negative ground 50Wx4 channels 25Wx4 channels (4 ,10% T.H.D.) 4-8 ohm 5.0V 15A 180*100*167 mm 1.
PN:127075014960
