Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTION
Please read carefully and save this instruction, as
you may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock. If you are unfamiliar with proper
electrical wiring connections, please consult of a qualified electrician
before installing
Installing Step:
Remove the fixture and the mounting package from the box and make sure that no parts
missing in the box.
NOTE：THIS FIXTURE IS CONVERTIBLE TO PENDANT OR SEMI-FLUSH
1. Difference between pendant and semi-flush is the Loop (1), For pendant please thread
the Loop (1) onto the Nipple (2) and use the pendant mounting package. For Semi-Flush
please take out the Loop( 1) , thread the Ball Nut (7) onto Canopy(8) and use the Semi-
Flush mounting package.
2. Hang all the Drops into the Metal Ring.
3. Insert the Socket Sleeve (3) onto the Socket (4).
4. Install bulbs: (Bulbs not including in the package)
(Please don’t exceed the maximum capacity that recommended on the Sockets)
INSTALLATION IS NOW COMPLETED.
6-9985-3-94
BALL NUT(7)
CANOPY(8)
SOCKET SLEEVE(3)
SOCKET(4)
METAL RING(5)
DROP(6)
LOOP(1)
DROP 5PCS
(INCLUDING SPARE PART 1PC)
NIPPLE(2)
SOCKET SLEEVE(3)
SOCKET(4)
DROP(6)
METAL RING(5)