Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTION
Please read carefully and save this instruction, as you
may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in
order to prevent possible shock. If you are unfamiliar with proper electrical
wiring connections, please consult of a qualified electrician before installing
Installing Step:
Remove the fixture and the mounting package from the box and make sure that no parts
missing in the box.
NOTE：THIS FIXTURE IS CONVERTIBLE TO PENDANT OR SEMI-FLUSH
1. Difference for pendant and semi-flush is the Loop(1), For pendant please thread the Loop(1)
onto the Nipple (2) and use the pendant mounting package. For Semi-Flush please take out
the Loop( 1) and use the Semi-Flush mounting package.
2. Through the Nipple (6) into the Coupling(5), then put the Cover(7) onto the Nipple(6), use
the Finial (8) thread tightly.
3. Insert the Candle Cover(3) onto the Socket(4).
4. Install bulbs: (Bulbs not including in the package)
(Please don’t exceed the maximum capacity that recommended on the Sockets)
INSTALLATION IS NOW COMPLETED.
6-8905-4-41