Installation Sheet

ASSEMBLY AND INSTALLATION

INSTRUCTION

Please read carefully and save this instruction, as

you may need them at a later date.

CAUTION

Turn off the main power at the circuit breaker before installing the fixture,

in order to prevent possible shock. If you are unfamiliar with proper

electrical wiring connections, please consult of a qualified electrician

before installing.

Installing Step:

Remove the fixture and the mounting package from the box and make sure that no

parts missing in the box.

1.Put the arm to equal distribution

2．Put the tube (F) onto the Fixture body(A),then tighten the Finial (B).

3. Put the Cup(G),Hex nut (C),Steel washer(D),Rubber washer (E), Glass shade(H),onto

the Support(I),then tighten the Hex nut(C).

6. Put the Glass shade(H).,Support(I) onto the Tube (F),then tighten the Finial (F).

7.Install bulbs: (Bulbs not including in the package) .

(Please don’t exceed the maximum capacity that recommended on the Sockets)

INSTALLATION IS NOW COMPLETED.

6-334-2-13

6-334-2-SN